Tip:
Highlight text to annotate it
X
Ahora que ha terminado de pintar los techos y las paredes, es hora de pintar las ventanas.
Necesitará una brocha pequeña para este proyecto. Dependiendo del tamaño de las molduras,
una brocha de 1 ½ a 2 pulgadas en ángulo le permitirá pintar los bordes y llegar a
las diferentes partes de los marcos de la ventana. Quite todas las partes de la ferretería
que no quiere pintar y colóquelas en una bolsa o un contenedor para no perderlos. Siempre
trabaje desde la parte superior hacia abajo y comience pintando la ventana que se mueve.
Pinte el marco de la ventana y por último la pieza de apoyo. Esto le ayudará a evitar
pasar a llevar o tocar la pintura fresca.
Pinte lenta y cuidadosamente, y trate de evitar pintar las guías de las hojas de la ventana
para evitar que se peguen. Si tiene ventanas que se abren hacia arriba y hacia abajo, levante
la ventana de abajo y baje la ventana de arriba. Luego pinte la mitad inferior del marco de
arriba. Vuelva a subir el marco de arriba y baje el marco inferior, y luego pinte la
mitad superior del marco superior. Ahora levante el marco inferior una pulgada o dos y pinte
el marco inferior. Luego pinte los marcos y por último la pieza de apoyo.
Deje que los marcos se sequen antes de pintar el marco de la ventana y la pieza de apoyo.
El objetivo es evitar pintar el vidrio, pero si sucede, no se preocupe, use un raspador
de pintura para raspar la pintura del vidrio.
Now that you’ve finished painting the ceilings and walls, it’s time to paint the windows.
You’ll need a small brush for this project. Now depending on the size of the molding,
a 1 ½ inch to 2 ½ inch angled brush will allow you to cut in on those edges and hard
to reach parts of the window frame. Remove the hardware that you don’t want painted,
and place them in a small plastic bag or a container so they don’t get lost. Now always
work from the top of the window down, and start painting the window that moves. Paint
the sash, the trim, and then the window sill last. This will help you avoid bumping in
to or touching wet paint.
Paint slowly and carefully, and try to avoid getting paint in the sliding tracks so that
you avoid gluing your window shut with paint. If you have windows that move up and down,
raise the lower sash up and lower the upper sash down. Then paint the lower half of the
upper sash. Raise the upper sash back up and lower the lower sash, and then paint the upper
half of the upper sash. Now raise the lower sash an inch or two and paint the lower sash.
Then paint the trim and window sill last.
Allow the sashes to dry before painting the window frame and window sill. The goal is
to avoid getting paint on the window, but if that happens no worries, use a window paint
scraper to scrape the paint off the glass.