Tip:
Highlight text to annotate it
X
How to add split coil feature to a guitar with double coil humbuckers Como agregar opción doble/simple bobina a micrófonos de la guitarra
This is a push-pull DT-DP piggyback mounted on potentiometer (with same resistance value as the original pot) Este es un switch push-pull montado sobre potenciómetro de igual valor que el original a reemplazar
After loosening the strings, gently unscrew the bridge Luego de aflojar las cuerdas, despacio retiramos el puente
The strings are gone... Ya no están las cuerdas...
...but still attached to the tuners ...aunque siguen agarradas a las clavijas
Neck humbucker detached Quitamos el humbucker (micrófono doble bobina) de cuello o mástil
One of these wires connects both coils (they are wired in series) Uno de estos cables es el que conecta ambas bobinas (conectadas entre sí en serie)
The black wire connects both coils, no need to cut it as it is in fact 2 wires connected Se ve que el *** une ambas bobinas, no es necesario cortarlo ya que en realidad son 2 cables unidos
The split wire soldered to the black wire Cable "split" (derivación) naranja soldado al cable *** que conecta ambas bobinas
With the neck humbucker done, we proceed to the bridge humbucker (its split wire will be light blue to avoid confusion) Finalizado el trabajo con el micrófono de mastil, seguimos con el de puente (su cable split será celeste para evitar confusión)
The electronics looks like this before any change, but both long split wires can be seen (orange and light blue) Asi se ve la electrónica antes de modificarla, pero ya se ven ambos cables split (uno por micrófono, naranja y celeste)
Testing the split feature using clips Probando el split usando cocodrilos de electrónica
To avoid confusion, I will move wires from the original potentiometer to the new one, one by one Para evitar confusión, colocamos ambos potenciómetros juntos para ir mudando de a uno los cables
Testing by touching the mics with a (metal) screwdriver Probando el split tocando los micrófonos con un destornillador metálico
Split wires soldered to the double inverter Cables split soldados al doble inversor
And the other ends soldered to the pickup selector Y los otros bornes del switch soldados el selector de micrófono
We haven't altered the guitar appearance at all. No hemos alterado el aspecto de la guitarra en lo mas mínimo.